1 files changed, 26 insertions, 28 deletions
diff --git a/bin/realtime-suggestions b/bin/realtime-suggestions
index 2852476..632825a 100755
--- a/bin/realtime-suggestions
+++ b/bin/realtime-suggestions
@@ -2,7 +2,7 @@
 
 set -euo pipefail
 
-warning="WARNING:"
+change="CHANGE:"
 info="INFO:"
 kernel_config="/proc/config.gz"
 sysctl_ref="(see \`man 5 sysctl.conf\`, \`man 5 sysctl.d\` or \`man 8 sysctl\` for reference)"
@@ -30,7 +30,7 @@ check_filesystems() {
     options="${mount_point_data[5]}"
     if [[ "$where" != /boot* ]]; then
       if [[ "$options" != *relatime* ]] && [[ "$options" != *noatime* ]]; then
-        echo "$warning $what mounted on $where (type $type) should use the relatime mount option for performance."
+        echo "$change $what mounted on $where (type $type) should use the relatime mount option for performance."
       fi
       if [[ "$type" == *fuse* ]] || [[ "$type" == *reiserfs* ]] || [[ "$type" == *vfat* ]]; then
         echo "$info $what mounted on $where (type $type) is not a good filesystem for large files or realtime use."
@@ -43,7 +43,7 @@ check_groups() {
   local groups=""
   groups=$(groups)
   if [[ "$groups" != *audio* ]]; then
-    echo "$warning Add your user to the audio group. It's used for access to audio devices on most distros."
+    echo "$change Add your user to the audio group. It's used for access to audio devices on most distros."
   fi
   if [[ "$groups" != *realtime* ]]; then
     echo "$info Some distributions use the realtime group for elevated resource limits."
@@ -53,13 +53,13 @@ check_groups() {
 check_ulimits() {
   local limits_ref="(see \`man limits.conf\` for reference)"
   if [[ "$(ulimit -t)" != "unlimited" ]]; then
-    echo "$warning The CPU limit for your user is not unlimited $limits_ref."
+    echo "$change The CPU limit for your user is not unlimited $limits_ref."
   fi
   if [[ "$(ulimit -l)" != "unlimited" ]]; then
-    echo "$warning The locked-in-memory limit for your user is not unlimited $limits_ref."
+    echo "$change The locked-in-memory limit for your user is not unlimited $limits_ref."
   fi
   if [ "$(ulimit -r)" -le 50 ]; then
-    echo "$warning The maximum rt priority for your user ($(ulimit -r)) is very low. Consider increasing it up to 98 $limits_ref."
+    echo "$change The maximum rt priority for your user ($(ulimit -r)) is very low. Consider increasing it up to 98 $limits_ref."
   fi
 }
 
@@ -67,7 +67,7 @@ check_vm_swappiness() {
   local minimum=10
   local proc_file="/proc/sys/vm/swappiness"
   if [ "$(cat "$proc_file")" -gt $minimum ]; then
-    echo "$warning Consider decreasing 'vm.swappiness<=$minimum' to prevent early write to swap $sysctl_ref."
+    echo "$info Consider decreasing 'vm.swappiness<=$minimum' to prevent early write to swap $sysctl_ref."
   fi
 }
 
@@ -75,7 +75,7 @@ check_max_user_watches() {
   local minimum=524288
   local proc_file="/proc/sys/fs/inotify/max_user_watches"
   if [ "$(cat "$proc_file")" -lt $minimum ]; then
-    echo "$warning Consider increasing 'fs.inotify.max_user_watches>$minimum' - the maximum amount of files inotify can watch $sysctl_ref"
+    echo "$change Consider increasing 'fs.inotify.max_user_watches>$minimum' - the maximum amount of files inotify can watch $sysctl_ref"
   fi
 }
 
@@ -89,7 +89,7 @@ check_cpu_governor() {
     policy_no="$(echo "$governor_file"| cut -d'/' -f7)"
     cpu_no="${policy_no//policy}"
     if [[ "$governor" != "performance" ]]; then
-      echo "$warning CPU $cpu_no has governor $governor set. Set it to 'performance' $cpupower_ref."
+      echo "$change CPU $cpu_no has governor $governor set. Set it to 'performance' $cpupower_ref."
     fi
   done
 }
@@ -99,26 +99,24 @@ check_config_high_res_timers() {
   local config_ref="(see \`man 7 time\` for reference)"
   if [ -e "${kernel_config}" ]; then
     if ! zgrep -q "$config" "$kernel_config"; then
-      echo "$warning CONFIG_HIGH_RES_TIMERS needs to be activated for your kernel $config_ref."
+      echo "$change CONFIG_HIGH_RES_TIMERS needs to be activated for your kernel $config_ref."
     fi
   else
-    echo "$warning $kernel_config could not be found or accessed."
+    echo "$change $kernel_config could not be found or accessed."
   fi
 }
 
 check_config_no_hz() {
-  local config1="CONFIG_NO_HZ_IDLE=y"
-  local config2="CONFIG_NO_HZ=y"
+  local configs=( 'CONFIG_NO_HZ_COMMON=y' 'CONFIG_NO_HZ_FULL=y' 'CONFIG_NO_HZ=y')
   local config_ref="(see https://elinux.org/Kernel_Timer_Systems#Dynamic_ticks for reference)"
   if [ -e "${kernel_config}" ]; then
-    if ! zgrep -q "$config1" "$kernel_config"; then
-      echo "$warning $config1 needs to be set for your kernel for 'dynamic ticks' support $config_ref."
-    fi
-    if ! zgrep -q "$config2" "$kernel_config"; then
-      echo "$warning $config2 needs to be set for your kernel for 'dynamic ticks' support $config_ref."
-    fi
+    for config in "${configs[@]}"; do
+      if ! zgrep -q "$config" "$kernel_config"; then
+        echo "$change $config1 needs to be set for your kernel for 'dynamic ticks' support $config_ref."
+      fi
+    done
   else
-    echo "$warning $kernel_config could not be found or accessed."
+    echo "$change $kernel_config could not be found or accessed."
   fi
 }
 
@@ -128,10 +126,10 @@ check_config_preempt_rt() {
   local config_ref="(see https://wiki.linuxfoundation.org/realtime for reference)"
   if [ -e "${kernel_config}" ]; then
     if ! zgrep -q "$config1" "$kernel_config" && ! zgrep -q "$config2" "$kernel_config"; then
-      echo "$warning The PREEMPT_RT patch set is not available on your kernel $config_ref."
+      echo "$change The PREEMPT_RT patch set is not available on your kernel $config_ref."
     fi
   else
-    echo "$warning $kernel_config could not be found or accessed."
+    echo "$change $kernel_config could not be found or accessed."
   fi
 }
 
@@ -142,13 +140,13 @@ check_config_irq_forced_threading() {
   if [ -e "${kernel_config}" ]; then
     if zgrep -q "$config2" "$kernel_config"; then
       if ! zgrep -q "$config1" "$kernel_config" && ! grep -q "threadirqs" /proc/cmdline; then
-        echo "$warning Without $config1 on your kernel, you can still use the threadirqs kernel parameter $config_ref." 
+        echo "$change Without $config1 on your kernel, you can still use the threadirqs kernel parameter $config_ref." 
       fi
     else
-      echo "$warning Use a kernel with $config2 $config_ref."
+      echo "$change Use a kernel with $config2 $config_ref."
     fi
   else
-    echo "$warning $kernel_config could not be found or accessed."
+    echo "$change $kernel_config could not be found or accessed."
   fi
 }
 
@@ -167,7 +165,7 @@ check_legacy_timers() {
 check_cpu_dma_latency() {
   local dev_file="/dev/cpu_dma_latency"
   if [ ! -w "$dev_file" ]; then
-    echo "$warning $dev_file needs to be writable by your user to prevent deep CPU sleep states."
+    echo "$change $dev_file needs to be writable by your user to prevent deep CPU sleep states."
   fi
 }
 
@@ -180,14 +178,14 @@ check_coupled_interrupts() {
   for interrupt_line in "${interrupts[@]}"; do
     interrupt_number="$(echo "$interrupt_line"| cut -d':' -f1)"
     if [[ "$interrupt_line" == *"$interrupt_delim"* ]]; then
-      echo "$warning IRQ$interrupt_number has coupled interrupts $interrupt_ref."
+      echo "$change IRQ$interrupt_number has coupled interrupts $interrupt_ref."
     fi
   done
 }
 
 check_irqbalance() {
   if pgrep -i irqbalance >/dev/null 2>&1; then
-    echo "$warning The irqbalance service is running on your system. It might interfere, so consider disabling it."
+    echo "$change The irqbalance service is running on your system. It might interfere, so consider disabling it."
   fi
 }